A New Way To Control Bad Behaviors In Dogs!

 

Introduction

This dog barking control device is used to control behaviors your dog is doing that you want to stop. It’s very effective and is used on one dog at a time. If your dog is chewing, digging, barking or doing some behavior you want to stop, then this device is for you.

This control device does not use training collars like some other sellers use to control bad behaviors. Click on the link to learn more about how to use this new training system.

This device uses sounds that only your dog can hear to get his attention when he is doing something bad.

This device is made by a company called NPS and they use the latest technology to get your pets attention when they are doing something wrong. This device was released in 2023, with already over 1,290 purchases on Amazon with high ratings.

Is the NPS device safe to use? The answer is yes. The company spent years developing and testing to achieve exceptional device safety for a dog’s welfare and correct bad behavior.

The device comes with 3 modes of operation to help control those bad dog behaviors.

Now, train your dog to stop unwanted behaviors: barking, jumping up, food stealing, dog aggression, biting, chewing and furniture avoidance. No need to yell or swat; simply point to the dog. Push the button. NPS deters your furry friend from barking and bad behaviors.

As long as you are within 25 feet from your dog, this device will get his attention.

Because it’s sleek and compact it fits easily into your pocket or purse. You can take it with you wherever you go with your pet.

The company offers six free online dog training courses on how to use the device and how to control bad behaviors. Click on the link to learn more.

How To Use The Control Device Video

Below is a short video on how to use the control device on your dog to stop pacific behaviors your dog is doing.

Getting It Ready for Use

Before you can use this product for the first time, you must perform some tests to ensure it is working properly. Follow the instructions below.

Step 1: Testing the Device

Step 2: Turn the ON/OFF switch to the “ON” position.

Step 3: Press the “Sound Button” and see if the LED light flashes Green. If yes, the device is ready to be used.

1. If no, the LED light is flashing Red. It needs to be charged. Charge the device and repeat these steps.
2. If this is not the case or the unit fails to operate when turned on, contact customer support at: https://www.petnps.com/support as you may have a defective device. Just fill out the online form and they will get in touch with you within 1 business day.

How Does This Device Work?

First and foremost, this device uses an ultrasonic sound that only dogs can hear as long as they are within 25 feet from the device. It is absolutely safe to use.

This device is best used on dog’s ages 6 months to 8 years old. As a dog ages his hearing gets affected and difficult to react to the sound the device emits. For puppies under 6 months old, their auditory system is not fully developed and will have difficulty in understanding the sound that the device emits into a corrective behavior.

The device works using any of the following three modes:

• The sound mode
• The ultrasonic training mode
• The flash plus ultrasonic advanced mode

The Sound Mode

This is the recommended starting mode to use for the first time. Once you have determined that the device is ready to be used, you can proceed to use this mode.

• When using this device be sure your dog is within 25 feet from you. Otherwise, it will not be effective.
• Point the device at your dog.
• Be sure there are no obstacles between you and your dog.
• To get your dog’s attention, press the Sound Mode Button. The device will beep for 2-3 seconds with one push of the button.
• Follow the steps below for actual use.

1. Show the device to your dog.
2. Say “Sit”, “Stay”, “Stop” or any other command.
3. Press the Sound Mode Button
4. The device will sound off and get the dog’s attention.
5. You can hold the button down for a sustained effect. This will only go for a maximum of 8 seconds to protect the dog’s sensitive ears.
6. When the dog properly performs the command, give them a treat so they can associate the good behavior.

The Ultrasonic Mode

Use this mode if your dog has difficulty in obeying your commands when using the Sound Mode method. In this mode, it will emit an ultrasonic tone that dogs are highly sensitive too.

When pressing the Ultrasonic Mode Button, it will emit an ultrasonic tone for 2-3 seconds with one press of the button.

Grab the dog’s attention by doing the following:

1. Show the device to the dog.
2. Issue a command of “Sit”, “Stay” or “Stop” or some other command.
3. Press the Ultrasonic Mode Button once.
4. The device will sound off and get the dog’s attention.
5. In this mode, you can hold down the button for a sustained effect up to 8 seconds.

The Flashlight Ultrasonic Mode

This mode is used if your dog will not respond well to the sound mode. It also is good to use in low-light situations.

When this mode is used, it will emit a flash of light with the ultrasonic tone. The device will emit an ultrasonic tone for 2-3 seconds and rapidly flash its light with one press of the button.

To grabs the dog’s attention, do the following:

1. Show the device to the dog.
2. Issue a command of “Sit”, “Stay” or “Stop” or some other command.
3. Press the Ultrasonic Tone Button once.
4. The device will flash, sound off, and get the dog’s attention.
5. You can hold down the button for a sustained effect for up to 8 seconds.
6. The light will rapid flash and emit an ultrasonic tone.

Useful Tips

• The device will work only on one dog at a time.
• The trainer device works when the dog associates the sound or tone with a command.
• If you are unsuccessful in using any of the three modes, wait 3 minutes and try again.
• Be sure to use the device within 10-15 minutes of the bad behavior that is occurring.
• The device trainer has successfully worked on 97% of all dogs. If your dog fits into the 3% category, just contact the company for a full refund. (https://www.petnps.com/support).
• Never allow a child to control or use this device. It’s a training device and not a toy. It should only be used to help in modifying your dog’s bad behavior.

Questions About The Device

Below are some of the most common questions people are asking about the device.

Question 1: Does Ultrasonic Affect Other Animals?

Answer: It’s not impacting other animals as long as they are out of the 25 foot range. Household pets like cats and birds are not affected.

Question 2: Will this hurt my other dogs who are not reactive barkers?

Answer: While this device will not harm your other pets, remember this is a training device. So, you will need to separate your already trained dogs from the reactive barker. To avoid confusion, be sure those pets are beyond the 25 foot radius.

Question 3: Why is NPS most effective with dog’s ages 6 months to 8 years old?

Answer: Age-related hearing loss makes it challenging for dogs over 8 years old to hear and react. Before 6 months, a puppy’s auditory system is not fully developed enough to fully understand the impact.

Question 4: I almost got attacked by two dogs, can this device help scare them away?

Answer: Yes. Just press the button for animals within the 25 feet radius.

Question 5: What is the frequency of the sound?

Answer: It emits 25kHz +/-1.0 kHz for 8 seconds, just long enough to safely grab the dog’s attention.

Question 6: Will this device work in a car? My dog goes insane when they see a motorcycle.

Answer: Yes. It will work anywhere.

Question 7: Will this device work on all dog breeds?

Answer: It will work on 97% of all dog breeds. However, the device will not work on 3% of all dogs. If this is the case for you, just contact the company for a full refund.

Question 8: How long does it take to charge this device?

Answer: It takes anywhere from 1-2 hours.

Question 9: Can this device be used for dog behaviors other than barking?

Answer: Yes. This device will work on all dogs that are exhibiting any type of bad behavior. It will get their attention.

Unit Features

Now, let’s review the features of this product.

• Price at Time of Publish: $37.99
• Manufacture: NPS
• Model: Alpha (TZ-U33)
• Dimensions: 5.08 x 2.95 x 5.29 Inches
• Weight: 0.29 Ounces
• Training Modes: 3
• Training Mode Types: Sound Mode, Ultrasonic Mode, Flashlight Plus Ultrasonic Mode
• On/Off Button: Yes
• LED Lights: Yes
• Effective Distance: 25 Feet
• Battery Capacity: 1000mAh
• Rechargeable Battery: Yes
• 8 Second Safety Shutoff: Yes
• Battery Indicator Lights: Green (Ready to go) & Red (Needs to be charged)
• Battery Charging Time: 1-2 Hours
• Battery Operation: 32 Hours
• Training Limit: 1 Dog At A Time
• USB Charging Port Type-C: Yes
• In The Box: Dog Training Device, Charging Cable, Wrist Strap, and User Manual
• Warranty: 2-Years
• Website: https://www.petnps.com/